"These are to be completed to finish off your new home"

2nd Fix Electrics

The installation of power points, lighting and switches in accordance with the appropriate regulations. This will also include connection to the mains supply and testing.
Before completion of the project a copy of an electrical installation certificate should be issued by your electrician.
Remember that the Electricity Board will not connect unless all wiring is complete. If necessary, fit a bayonet point to those bare wires that are “just waiting for a fitting”.

The installation of the sanitary ware, radiators, boiler and rainwater goods etc. This will also include commissioning and the issuing of certificates for Building Control approval. In most cases your plumber will fix the rainwater goods, e.g. guttering and down pipes, as part of his second fix work.
Don’t Forget to give services (water, gas and electricity) plenty of notice of your requirements and timing for connection.

“This trade is usually labour only with the decorator providing most of their own tools including brushes, sandpaper and fillers”

Potton Timber windows and door frames are supplied with a protective base coat, suitable for receiving either paint or stain decoration.
It is essential to complete final decoration as soon as possible, and in accordance with the chosen manufacturer’s instructions.

Stairs, internal doors, skirtings, architraves, door studs and linings can be finished in any proprietary stain or paint to suit your chosen colour scheme.

Preparation is two thirds of a decorator’s job and it is worth spending time to do this properly

It is important that work is carried out in a clean and dust free environment

Allow plenty of time for the inside to dry out before decorating